2010年,加州霍桑,SpaceX的车间里,一年造出的火箭发动机数量,超过美国其他所有公司加起来的总和。马斯克说这句话时语气很平,像在念一个仓库盘点数字。
那年Falcon 9还没首飞。第一个飞行贮箱的桶段还躺在地上等焊接,第一枚火箭在德州的测试台上。Dragon飞船的压力舱快装完了,但一次轨道飞行都没做过。NASA的商业货运合同已经签下,几百号人挤在一栋从“相当凄凉”改过来的厂房里。
镜头跟着马斯克走进大堂。墙很白,他说很快会有些酷东西搬进来,让这里没那么白。
门越少,话越多
SpaceX的办公区是开放式的,一层能坐三百人,三层楼只开了一层。马斯克说目标是最大化沟通,顺带让地方看起来体面一点。
他的办公室在大堂一侧,很小。
我们尽量少设办公室,因为门会限制沟通。(马斯克)
除了HR和财务少数几个人,公司所有人都在隔间(cube)里,包括副总裁。镜头扫过去,Gwynne Shotwell坐在她的隔间里。她后来成了SpaceX总裁,当时负责销售,管Falcon 1、Falcon 9和Dragon的订单。
办公区中间留了一小块地方,供人站着开临时会议。马斯克说这种开放还有个好处:你能一眼看到别人屏幕上在干什么。他走到一个工程师身后问,你在做什么?对方说,在做Draco推进器的装配文档。
Draco是飞船在轨用的姿态控制发动机,装在Dragon上,也用在Falcon 9上面级做轨道机动和再入。
会变不透明的玻璃和工程师的名字
客户来访或者CEO级别的会面,用一间专门的会议室。玻璃带运动传感器,人一走进去就变不透明,外面看不见里面。
SpaceX的会议室都以火箭工程师和科学家命名。马斯克解释这个选择:
我们觉得他们值得这份荣誉,人类能走到航天文明这一步,靠的是他们。(马斯克)
也有以宇航员命名的房间,但重心放在设计和制造火箭的人身上。
走廊尽头是服务器房,大约500个处理器,跑计算流体力学(CFD)和有限元分析,还有3D实体建模的存储。马斯克感叹现在小空间里能塞的算力。
再往前一片工地,是未来的任务控制和发射控制中心。两块大银幕,可以拼成一整幅画面,也可以切成四块。地面是玻璃砖,从下面打光,桌子带蓝色灯带。2010年时还在施工,马斯克描述得挺兴奋。
68华氏度:金属会热胀冷缩
参观路线拐进一间温度明显低下来的房间。这是精密测量区,常年68华氏度,颗粒物也受控。
原因简单:金属在不同温度下会胀会缩,精密测量得有个固定基准。
SpaceX的流程是尽量3D设计、3D制造、3D检测,减少2D和3D之间的来回转换。偶尔2D更合适,但大多数时候3D更省事。
房间里那台三坐标测量机,能把零件测到千分之一英寸以内,验证加工有没有按图纸来。
让飞控计算机相信自己正在飞
隔壁是航空电子测试区。地上摆着Falcon 1一级和二级发动机的质量模拟器,外形和接口对,但不点火。
这套东西叫硬件在环仿真。飞控计算机和航空电子设备接上模拟器,从电子和转向的角度,它们会“以为”自己正把火箭送进太空。工程师在旁边验证计算机有没有做对所有该做的动作。
这样在地面上就能把飞行软件跑很多遍,不用每次都真发射。
太空没有空气来均衡温度
测试区有一排热循环箱,把零件放进50次温度循环里,看会不会出问题。
太空的热环境比地面狠得多。没有空气做介质,向阳面可能被晒到滚烫,背阴面冷得像黑夜,零件得扛住比地球上大得多的温差。
还有一台热真空循环器,同时抽真空和变温。
再往里是振动台,两个小的一个大的,模拟火箭起飞时零件承受的声学和振动载荷。马斯克说,东西往往是在这里坏得最多,比别的地方都多。
看起来像刑讯室的房间
有一间电磁干扰测试室,四壁贴满尖锥吸波材料。马斯克自己说它“看起来像个刑讯室”。
火箭或飞船上有一打左右的无线电设备,有发射的有接收的,各种频段。这间屋子用来验证它们不会互相干扰,也验证发出去的信号能被地面好好收到。
原材料进去,发动机出来
穿过一道门,进入机加工车间。大约30台设备,大小形状各异,有线切割电火花机(wire EDM)、车床、铣床。马斯克说,造一枚火箭要“雕刻”的金属量非常大。
很多人不知道的是,SpaceX按价值算,约80%的火箭部件是自己做的。
发动机这块,原材料金属进去,发动机出来。(马斯克)
一块锻件进来,被车、被铣、被切,最后变成发动机燃烧室的衬里。新到的机床还在调试,工人已经在上面切燃烧室的冷却槽、钻冷却孔。
旁边堆着发动机集合器、喷管零件、贮箱底、Falcon 9主氧管。
车间一角有几台自动弯管机。火箭上管子多,有些管子弯得像椒盐卷饼,程序编好之后,机器每次都能弯出一模一样的。
一年造的发动机比全美国加起来还多
发动机装配区摆着不同状态的喷管和铜质燃烧室衬里。Merlin真空版的喷管展开得更大,海平面版短一些,铜喷管露在外面。
Falcon 9的推进剂供应结构是单贮箱通过歧管分到九台发动机,加上加注和排空管线,一共10组5英寸直径的管子。马斯克打了个比方,有点像九缸发动机的汽车。
然后他说了那段最硬的话:
今年SpaceX造的火箭发动机,比美国其他所有公司加起来还多。明年,我们会比世界上任何国家造的火箭发动机都多。(马斯克)
这话在2010年听起来像吹牛。要理解它的分量,得看车间里在做什么。
镜头前是一台Merlin 1C,全再生冷却。它是运往德州参加九机点火测试的第九台,也是最后一台。九台一起点火,马斯克说会“相当壮观”。
他又补了一句背景:Falcon 9是美国现役最强的单芯火箭。两三年后Falcon 9 Heavy首飞,那时航天飞机已经退役,Heavy会成为世界上推力最强的火箭。运力大致相当于一架A380或者747。
涡轮泵、燃烧室、喷管、支撑结构、航空电子、控制阀。Falcon 1的构型外面多一个密封金字塔,级间阀门装在里面,除此之外和Falcon 9差别很小。
整流罩里能塞下一辆城市巴士
抬头看,天花板上挂着Falcon 9整流罩的四分之一截面。直径17英尺,长50英尺,碳纤维,非常轻。
马斯克说它能装下世界上最大的卫星,里面“真的能塞进一辆城市巴士”。用先进的分析方法优化质量,他相信这是同类里最轻的整流罩。
倒着放的飞船
Dragon压力舱快完工了,只差前后端盖。它现在倒着放,所以对接机构在下面。主舱门和几个窗口能看见。
这是实际飞行件,接下来要做完整的鉴定测试。
旁边的区域做Dragon总装。有做隔热罩复合材料的工装,有侧盾和鼻锥。
隔热罩用PICA,酚醛浸渍碳烧蚀材料。马斯克说这是“你能找到的最好的隔热罩材料”。
还有一件Dragon工程测试件,不是飞行件,是探路者,用来搞清楚飞船该怎么造。马斯克说它非常有用。
右侧放着一个空间站对接机构的环,真正会和空间站对接的那种。
高湾里躺着三个贮箱
东高湾用来做Falcon 9贮箱,也临时堆东西。
身后是Falcon 9的二号贮箱,已经完工。一号在德州测试台上。三号的桶段还在地上,等着焊起来。
三号才是第一个要飞的产品。一号是运行贮箱,二号是鉴定贮箱,三号见飞行。
旁边一个Falcon 1二级的鼓胀成型工装。两张用铌铪合金焊起来的锥体,被鼓成一个圆润的轮廓,那是推力效率最优的形状。
洁净室目前既做推进组件,也临时做复合材料铺层。那个巨大的芯模用来做Falcon 9的级间段、Dragon trunk段、推进段裙,所有12英尺直径的圆柱体部件。等复合材料准备间装修好,这些会搬过去。
Falcon 1的结构装配也在这一片。鼻锥半截面、有效载荷适配锥、级间段芯模。Falcon 9的级间段就是Falcon 1的放大版。
地上有个Falcon 1 flight 5的桶段。Flight 3在夸贾林环礁(Kwajalein Atoll),几乎准备好发射。Flight 4三四个月后。Flight 5明年上半年。已经有客户感兴趣,交易快谈成了。
复合材料区有两个烤箱,大的烤大件,小的烤小件。
一架Falcon 1上面级立在那里,发动机、作动器、姿态控制系统的管路、压力瓶。这是flight 4,flight 5在后面,还没怎么动工。
参观路线的最后一站是零食区。免费零食和饮料,互联网公司常见,航天公司不常见。
有人加班到很晚,想吃点东西,应该随手就能拿到。(马斯克)
一百万磅液氧和能挡世界末日的避雷塔
镜头切到佛罗里达,卡纳维拉尔角。阿波罗登月计划从这里出发,航天飞机、Lockheed的Atlas、Boeing的Delta 4都在附近。SpaceX用的是Titan 4的旧址,Titan 4曾是全美最大的火箭。
Brian Mosdell负责发射场建设,1991年入行,说很兴奋加入SpaceX。
Falcon 9将来就坐在他身后那块地上。接下来几个月要建发射架和机库。远处是巨大的避雷塔,卡纳维拉尔角雷暴多,马斯克说这些东西“基本能保护我们免受世界末日”。
他站在一个巨大的液氧球顶上。
他们说SpaceX有大球,这是真的。(马斯克)
这个球能装约一百万磅液氧,够一次Falcon 9飞行还有富余。
旁边是火焰导管,火箭点火时火焰和大量蒸汽从那个大洞口喷出去。
一面墙上记录着在这里发射过的火箭。Titan 4用过这个工位,从它的旧址起飞,马斯克觉得是很好的传承。
控制室在12英里外,刚好在卡纳维拉尔角基地大门外。这样客户和访客来看自己的载荷、进控制室,不用过空军基地的层层安检。
一年前破土动工,预计明年年中具备发射条件。马斯克说几个月后再来拍一次,变化会相当可观。
回头看这趟2010年的参观,零件尺寸只是表面。真正值得记的,是一套做事的方式。车间里80%的部件自己造,办公区把门拆掉,测试区把热、振、电磁全放在地面做完,发动机一年造得比全美国还多。这些事单拎一件都不新鲜,叠在一起,才有了后来那年12月Dragon第一次进入轨道的底气。
给看到这里的人几条能直接用的:
- 把办公室的门尽量拆掉,让“问一句”的默认成本降到最低,副总裁也坐在隔间里。
- 按价值算,把核心部件尽量自己做,质量和进度都攥在自己手里,2010年的SpaceX是80%。
- 设计、制造、检测尽量用同一套3D数据,减少2D和3D之间的来回转换。
- 飞行软件别等上天再验,用硬件在环仿真在地面把飞控计算机“骗”够。
- 热循环、热真空、振动、电磁干扰这些环境测试,集中在地面做完,别指望上天补救。
- 精密测量区定一个固定温度(SpaceX是68华氏度),因为金属会热胀冷缩。
- 加班的人手边要有免费零食和饮料,这关系到效率,别当成福利来算账。
0:05Well, welcome to SpaceX. Here we are in the lobby. It's very white right now, but there are actually some some cool elements coming in soon that will make it less white. In the front of the building we have our engineering offices and space for about 300 people per floor and we've got a total of about three floors that we can open. Right now only the first floor is occupied. We try to aim for something which is a very open plan to maximize communication and make it sort of, you know, fairly nice looking.
0:35This place used to be quite dismal. That's that's my office over there, actually. We really try to minimize the number of offices that we have because doors limit communication. Everyone at the company with the exception of a few people like HR and finance actually are in cubes including your vice presidents over there. There's Gwynne at her cube.
0:57I'm in the finance department. Although this is really reality, I guess. I'm responsible for sales. I'm in charge of making sure that there's revenue here in the company and we're working on lots of Falcon 1 deals, Falcon 9 deals and Dragon deals. So this is just a little area where people can meet and and have sort of impromptu meeting.
1:18As you also very open. I think it's it's actually quite helpful to have this openness because then you can sort of see what people are working on their computers. Like what Matt McCune here is is doing? What are you working on there? I'm making a assembly documentation for the Draco.
1:39Okay. RCSM David is is driving the development of our in-space thruster which is called Draco. and there's a little piece of it or actually that's just a temp that's just a sample. It's fun cone, yeah. Yeah, we're doing a lot of our Texas testing at our facility down there. Got a new vacuum system, so kind of going back and forth between there and our prior salons.
2:05All right. So, this the Draco engine is what is used in our Dragon spacecraft and also in the upper stage of of Falcon 9 for orbital maneuvering and re-entry. This is our meeting room the actual meeting room for when we meet with our customers and if we have a CEO or a customer comes to visit or something like that. It's kind of cool cuz it's got this glass that that goes opaque and we put a motion sensor on it. So, as you walk in, the glass goes opaque.
2:33We We named our conference rooms after the great rocket engineers and great scientists related to space. So, we think they they really deserve the credit for you know, enabling us to become a space-faring civilization. So, we're fairly science and engineering-centric. We have some some conference rooms named after astronauts, too, but but we try try to focus more on the the people that actually design and build the rocket.
3:16That That's where we have our server room, which has I think I don't know somewhere in the order of 500 processors for computing I think computational fluid dynamics, finite element analysis, and obviously all of our server storage for our 3D solid modeling and that kind of thing. It's It's amazing how many processors you can get in a in a small space these days with with my computing.
3:38over there, this is under construction, but this is where our mission control and launch control will be. So, there's two Imagine like two big cinema screens. That's one of them and that's another one over there in the back. And we can either have one giant image or we can have four smaller images. So this whole thing is going to get laid out and there's going to be a a glass tile floor which is illuminated from below and there's cool desks with kind of blue lights. It'll look really pretty pretty neat. So this area is where we do all of our our inspection and it's it's climate controlled and particular controlled so because metals expand and contract at
4:18different temperatures so we always want to make the show room is at exactly 68° for doing our precision measurement. And wherever possible we try to design a part in in 3D to manufacture it in 3D and then to inspect it in 3D so we minimize the number of 2D to 3D conversions. Occasionally something's better in 2D but mostly it's better in 3D.
4:40So here we are in it's the temperature just went down a whole lot because we're in our precision control area. And what that machine is going to do is it's going to inspect that part down to within thousands of an inch to verify that everything was machined as it should have been.
4:54So what we have here is this is a that's a mass simulator of the Falcon 1 first stage engine. That's a mass simulator of the second stage engine over there. And we have what's called a a full hardware in the loop simulation of the vehicle. So from an avionics electronic standpoint and from a steering standpoint the flight computer and avionics think that they're flying the vehicle to space and then we verify that they've done all the the computer's actually done all the things it's supposed to do to to make the rocket get successfully to space.
5:28So here we're in our avionics test facility. That's where we do test avionics of all kinds and shapes. So here we have a bunch of thermal cycling chambers that'll take parts and put them through you know 50 thermal cycles to verify that things are going to be okay and the temperature environment in space This much worse than the ground because you don't have the you don't have thing you don't have air to even out temperature.
5:49So you could actually have to have something that be in in searing sunlight or black as night and it's got to be able to handle a much more of a temperature range than it would on Earth. That's a a thermal vacuum cycler. So it'll test both it'll test the app part in vacuum going through the temperature cycles. That's our shaker room. It's got two small and a big shaker. So we can simulate the enormous acoustic and vibrational loads that parts experience during the rocket takeoff.
6:17And that's that's really where things tend to break more than any other place. Hey Dylan, how are you? Good. We're just doing a little video blog thing of the of what's that? Yeah, exactly. I'm Dylan Dalton. I'm a avionics engineer. what I'm doing here right now is to set up for a test upcoming of our second stage that we're going to send out to to Texas for a hot fire.
6:41what you see here is our electrical ground support equipment. A copy of what we actually have out on fire drill on the launch pad. We do exactly a one-to-one replica here to test out the stages before we send them out. So we will be putting the stage two in its paces tomorrow and we're just doing some preparatory work on it.
7:00Yeah, this is our electromagnetic interference test chamber. It looks vaguely like a torture chamber but it's so it's basically set up so that when we we can take our rocket or spacecraft and put the section in here with with all the antennas and radios because there's like a dozen radios on on the vehicle of various or either transmitters or receivers of various kinds and we're going to make sure they don't interfere with one another and that they've got good we can sort of verify that the signal that's going out is going to be well received by the ground and that's what we use this chamber for.
7:35It's really great. This area is used for the engine components or the main engine components. So, you can see there's a nozzle or various nozzles at various stages of completion. and then you can also see the copper things of the chamber liners. You see the difference between that that that's a a Merlin vacuum configuration, which has got a a more spread out
8:11nozzle section, and that's the sea level configuration, which has got a a sort of short copper nozzle. Those are the propellant supply lines for Falcon 9. So, the the they've got a single tank that manifolds out to nine engines, and then you got fill and drain lines. So, there's a total of of 10 sets of 5-in diameter lines that's manifold out to the various engines.
8:36So, it's kind of like having like a nine-cylinder engine car or something like that. this is our our tube bending area. So, there's a lot of tubes on a rocket, and we have a couple of automated tube benders that once you program a particular type of tube, it could be a very complicated tube that looks like a crazy pretzel, and this machine can make that exact same tube every time perfectly.
8:58All right. So, here we are in the SpaceX machine shop. we have jeez, about 30 different machines of all sizes and shapes. we have wire EDM machines, which is electric discharge machining. We've got lathes, mills, There there's just an enormous amount of of metal sculpting that takes place to create the the vehicle. you know, what a lot of people don't realize is that SpaceX makes about 80% of of the vehicle by value in-house. So, you know, for the engine, raw metal comes in, and out comes an engine. And so, it's on these machines that that the metal is taken from its raw form and into the the final machine part form.
9:39So, a part like this will come in as a forging and and then it'll get turned and milled and cut and eventually end up as a as an engine chamber liner. This is a new machine that just arrived. It's just being tested in the first places before we start machining on it. They were actually cutting the grooves on a chamber and drilling the holes that are necessary for cooling. These are engine manifolds that connect the nozzle and the chamber.
10:07These are just various rocket parts, parts for the stages, parts for the engines. Those are some sumps. That's a tube for the main oxygen supply line to Falcon 9. Some more nozzle parts here. Another nozzle part, nozzle part. So, that's our machine shop. That's actually I mean, I haven't gone through everything cuz there's a lot of detail here and some of it's proprietary, but gives you a sense for what's capable. We actually got a lot of offsite machining that we do as well.
10:36We have a very high engine production rate here at at SpaceX. This year this year alone SpaceX will make more rocket engines than the rest of US production combined. And next year we'll we'll make more rocket engines than any country in in the world. So, that's a lot of rocket engines that all have to go through and be be made very efficiently and made very accurately.
11:03And that's what all these machines are for. What we're looking at here is Merlin 1C fully regeneratively cooled engine. It's getting ready to ship out to our test site in Texas to to be part of the nine engine firing. This is actually the ninth and final engine to be shipped out for that.
11:18And when we do that firing it's going to be quite spectacular. It Falcon 9 is the most powerful single core vehicle in the American fleet and when Falcon 9 Heavy debuts in in about two to three years, that will be the most powerful vehicle in the world because the shuttle will have retired by that point.
11:34So, that's really quite significant. It's, you know, the rough equivalent of an say an Airbus A380 or or 747. This thing is the turbo pump. this is this is the chamber, the nozzle, and then there's all the supporting structure in there with the avionics and control valves. And here you can see the difference with a Falcon 1 configuration. So, this is a sealed pyramid. The stage valving is contained inside that that that pyramid.
11:59but other than that, it's substantially the same with the turbo pump and the chamber and nozzle. Very little difference really between the Falcon 1 configuration and Falcon 9 configuration.
12:20So, what are we looking at up there? That's a quarter section of the Falcon 9 17-ft diameter fairing. It's 17-ft diameter obviously and and and 50-ft long. It's capable of taking the largest satellites in the world, and it can it can actually literally fit a a city bus in in in that fairing. It's that big cuz that's that's just a quarter section of it.
12:40it's made of carbon fiber. It's very lightweight, and uses the most, you know, advanced analytical techniques to optimize the mass. So, it's actually, I believe the lightest lightest weight fairing of its kind as well. what we're looking at here is the Dragon spacecraft pressure vessel. So, it's almost done. we just need to do the the forward and aft bulkheads. It's actually upside down right now, but you can see the main hatch, but some of the windows, the the actual common birthing mechanism where it berths to the space station is well, right there, cuz it'd ordinarily be the other way around.
13:19and this is an actual flight fidelity article that's going to go through full qualification testing. All right. This area is is dedicated to our Dragon spacecraft assembly. So, you see various tools. That's for our heat shield making the composite parts of our heat shield. Over there is the side the side shields and the nose cone.
13:41That's that's our That's the engineering test article half biscuit engineering pathfinder for our heat shield for Dragon which is to use a very mass material called the phenolic impregnated carbon ablator which is the really the best heat shield material you can possibly have. And this is the our engineering test article of our Dragon spacecraft.
14:00So, it's not quite fidelity. With the part we saw earlier with with we saw the welded piece. That's actually five fidelity. But this was used as an engineering pathfinder to figure out how we might make Dragon. And actually it's been very useful. On the right there is a is a space station birthing mechanism ring. So, that's an actual ring that will mate to the space station. There's another one on the Dragon itself although the guide vanes aren't aren't present.
14:26Here are various pieces like windows and pushers and flange bolts and nuts and these are structural bulkheads structural reinforcing bulkheads. That's the little moment we use to determine splashdown loading. So, here we are in East High Bay. So, we have two very large high bays. We're in the East one right now. The East High Bay is used for Falcon 9 stage construction and it's also temporarily used for storage which is why you see various bits and pieces around behind me. This area under the high bay is used for Falcon 9 tank fabrication. So, you can see behind me various barrel sections for Falcon 9.
15:01That's actually serial number two. That completed tank is serial number two of Falcon 9. Serial number one's on the test stand in Texas. And then serial number three is in in barrel sections on the floor. And we're getting ready to weld together those barrel sections and create our third tank which would actually be the first flight tank. So, the first one was a run tank. Second one was a qualification tank and the third one will see flight. That's a Falcon 1 second stage bulge former.
15:25So that's a classic bulge forming tool that's used to take two welded cones of of typical refractory alloy metal like columbium hafnium alloy and bulging it to a round contour which is the optimized contour for maximizing the efficiency of rocket thrust. This cleaner here is also climate controlled, particularly controlled, and it's it's currently used for propulsion components as well as temporarily it's used to do composite layup. So that giant tool you see there is the mandrel that's used to create the composite parts for Falcon 9. So it creates the the interstage, the Dragon trunk section, and the the propulsion section skirt. anything that's a body
16:08diameter a 12-ft diameter cylindrical part. And that that'll be moved over to the actual composites area when we have that composite preparation room done, which will be fairly soon. This area is where we do the a lot of the Falcon 1 structural assembly. So behind me that's that's a Falcon 1 half section of a nose cone. that's the tool on which the nose cones are made.
16:34that's an an avionics or the a payload adapter cone. That's another payload adapter cone. that's a mandrel for the the the the Falcon 1 interstage, which is similar to the Falcon 9 interstage. In fact, the Falcon 9 interstage is just a scaled-up version of the Falcon 1 interstage.
16:51This is a barrel section for Falcon 1 flight 5. So we have flight 3 on the island and we're currently at all ready for launch, almost ready for launch. Flight 4 is going to be right behind that. We'll launch in about 3 or 4 months time and then this is flight 5 which we'll launch sometime in the first half of the next year.
17:13we have light customers that are interested in that and we expect to do a deal on that fairly soon. And this area is also used for our composites fabrication. So, we've got a big oven there. She's used to cook big parts and a small oven for smaller parts. what we're looking at here is a Falcon 1 upper stage. so, you can see the the engine and actuators and the All that plumbing's for the attitude control system. it will actually hold the pressure in bottles. There's a lot more stuff that goes in the back there, but you can see the tank and the little skirts in the back that holds a lot of the structure.
17:43That's for flight four, and then the flight five unit is is right there behind it with obviously not much stuff done on it yet. This is a also snacky section. so, we offer people that work here, you know, get free snacks and drink, which is kind of a common thing in the internet world, but we're also unusual in the space world. And we think if people are working late and and and then and they need a snack or something, they should be have one readily available.
18:11All right. Well, thanks for following me on the tour back to the West SpaceX headquarters. There's actually a lot more other SpaceX facilities. We have a big test site in Texas. We've got a test a launch pad at Cape Canaveral launch island in the Kwajalein Atoll. and we're looking for great people of all kinds to join the company. So, if you're interested, please send us a resume.
18:44Five. First stage Four. Three. Two. One. We have liftoff. Liftoff. Here we are on the coast of Florida at Cape Canaveral. This is where tremendous history has been made obviously in in in space. So, where Apollo launch program and the moon missions all came from Cape Canaveral. Over there we have the space shuttle and the Lockheed Atlas facility.
19:08There's the vehicle assembly building for shuttle is over there. And then the Boeing Delta 4 vehicle. The launch site we're using is former was formerly used by the Titan 4, which was the largest vehicle in the US fleet. And we've done a lot of work to change and adjust it for for our vehicle and and make it make improvements.
19:27Let me introduce you to Brian Mosdell, who's managing the construction of the the launch site here at Cape Canaveral, and will manage the ongoing launch operation here. I have a lot of experience out here at the Cape launching rockets. I started here in my career in the in the space industry in 1991, and I'm thrilled to be part of the SpaceX team.
19:47Okay, so behind me is where the where Falcon 9 would would sit during launch. And the the big transformation that's going to occur over the next few months is the construction of the launch mount, and we're going to have the hangar constructed. Behind us, we see the giant lightning towers.
20:08There's a lot of lightning here at the Cape. And those things can pretty much protect us against Armageddon. Here we are on top of our giant ball of liquid oxygen. They say SpaceX has big balls, and it's true. It's capable of containing about a million pounds of liquid oxygen, more than enough for a Falcon 9 flight.
20:30Over there we have our flame duct. So, you can see that that big exit there is is a flame duct. The rocket flames and a whole bunch of steam comes out of that hole right there. This this wall is where they recorded the rockets that have launched here previously. The biggest rocket in the US fleet, the Titan 4, which is really gigantic vehicle, used this launch site.
20:55It's a great heritage to be launching from the former Titan 4 launch pad. And then we have our control room, which is 12 mi away, which is actually just outside the gates at Cape Canaveral, which makes it easier for visitors or customers to be there and and look at their their payload and and be there in the control room with us without having to go through all the security of coming on to Cape Canaveral, which is actually an Air Force base.
21:19We broke first broke ground on our launch site about a year ago. And we expect to be ready to launch by the middle of next year. All right, so that mostly concludes the tour of our of our launch pad. We'll do another updated tour in a couple months and you'll see how much this has transformed. It's going to be quite remarkable.
资源与出处
- 视频在 YouTube 收看
- 档案silicon-valley.tech 档案页本页视频与文稿数据来自 Elon Musk Archive
- 精读本篇精读 Markdown 版